New Performance with Matrix Composites of Used Plastic, Fiber of Red Pinang Sheath and Bamboo
DOI:
https://doi.org/10.36706/jmse.v1i1.7Keywords:
polyproplene, Bamboo fiber, fiber Pinang Merah, Composite, Mechanical StrengthAbstract
Utilization of scrap plastic to composite, especially made polyproplene (PP) has to be done by adding fibers and sheaths Pinang Red Bamboo. PP matrix is heated in the heater melted then added to each of the natural bamboo fiber and red nut. Mechanical properties of the test results have been compared with the fiber-matrix without the addition of a fibrous matrix. Tests showed that the mechanical properties of kompisit has increased with the addition of natural fibers. Mechanical strength with the addition of bamboo fiber is greater than the addition of the Red Pinang fiber.
Downloads
References
Aji,. I.S., Zainudin, E.S. and Abdan, Kenaf Fibresas Reinforcementfor Polymeric Composites:A Review International Journal of Mechanical and Materials Engineering (IJMME), Vol. 4, No. 3, 239-248 2009.
Hartono., Komposisi limbah plastik di Indonesia dan metode penanggulangannya., 1998.
Matoa., 2010., Tipe dan jenis kemasan bahan plastik, http://matoa.org/tipe-dan-jenis-kemasan- bahan-plastik/., Diakses pada tanggal 3 Juni 2012.
Moldingzone., 2011., Sejarah Plastik dan Molding, http://moldingzone.blogspot.com/2011/02/sejarah- plastik-dan-molding.html/., Diakses pada tanggal 3 Juni 2012.
Mujiarto, I., Sifat dan karakteristik material plastik dan bahan aditif., Jurnal Traksi. Vol. 3. No. 2., 2005.
Purboputro, P. I., Pengaruh Panjang Serat terhadap Kekuatan Impak Komposit Enceng Gondok dengan Matriks Poliester, Jurnal MEDIA MESIN, Vol. 7, No. 2, 70-76., 2006.
Sari,. Nasmi Herlina., Sinarep., Ahmad dan IGNK Yudhyadi., Ketahanan Bending Komposit Hybrid Serat Batang Kelapa/Serat Gelas Dengan Matrik Urea Formaldehyde, Jurnal Ilmiah Teknik Mesin Vol. 5 No.1. (91- 97)., 2011.
Surdia., Tata. dan Shinroku Saito., Pengetahuan Bahan Teknik., P.T. Pradnya Paramita, Jakarta., 1995.
Sosu,. E.K., Hasford, F. and Dadson, A.B.C., Study of Mechanical Properties of Composite Materials Madefrom Palm Fruit Fibre and Sawdust., Research Journal of Applied Sciences, Engineering and Technology 3(12): 1441-1444., 2011.
Sudraj Chonshohoken., PA. USABahar, H. Y., Teknologi Penanganan dan Pemanfaatan Sampah, PT. Waca Utama Pramesti “ 2004.
Tajan, Monchai, Chaiwutthinan, Phasawat and Leejarkpai., Thanawadeen, Thermal and Mechanical Properties of Wood-Plastic Composites from Iron Wood Flour and Recycled Polypropylene Foam., Journal of Metals, Materials and Minerals, Vol.18 No.2 pp.53-56., 2008.
Tampubolon., Evanora., Pembuatan dan Karakterisasi Papan Serat yang Dibuat dari Serat Tandan Kosong Kelapa Sawit-Urea Formaldehida, Fakultas MIPA, Universitas Sumatera Utara. Medan. 2010.
