AN OVERVIEW OF THE DEVELOPMENT OF SAFETY SYSTEMS IN INDUSTRIAL CONTROL SYSTEMS
DOI:
https://doi.org/10.36706/jmse.v8i1.52Keywords:
safety, industrial control system, factoryAbstract
Industrial machines can be very hazardous to human life, even automated ones. There are many regulations, laws, and technical approaches implemented to reduce the risks they can pose to people, especially industrial workers, and operators during maintenance or when direct intervention by people is required. With the industrial climate nowadays, which pushes for more and more safety for the workers, development in safety features of industrial control system has been increasing steadily. This paper analyzes some of the newest iterations of those safety systems and how they may influence the industrial field.
Downloads
References
L. E. G. Martins and T. Gorschek, “Requirements Engineering for Safety-Critical Systems: Overview and Challenges,” IEEE Software, vol. 34, no. 4, pp. 49–57, 2017, doi: 10.1109/MS.2017.94.
Y. Chinniah et al., “Safety of Machinery: Significant Differences in Two Widely Used International Standards for the Design of Safety-Related Control Systems,” Safety, vol. 5, no. 4, pp. 1–16, 2019, doi: 10.3390/safety5040076.
S. Chokkadi, C. C U, and Y. Jeppu, “Teaching Safety Critical Control System: A Success Story of Industry Academia Relation,” IFAC-PapersOnLine, vol. 51, no. 1, pp. 524–529, 2018, doi: 10.1016/j.ifacol.2018.05.088.
S. Rebello, H. Yu, and L. Ma, “An Integrated Approach for Real-Time Hazard Mitigation in Complex Industrial Processes,” Reliability Engineering and System Safety, vol. 188, no. February, pp. 297–309, 2019, doi: 10.1016/j.ress.2019.03.037.
K. Elena Vadimovna and K. M. Sergeevich, “Risk-Oriented Approach to Design of the Industrial Safety System: Problems, Solutions,” International Journal of Applied Engineering Research, vol. 12, no. 16, pp. 5463–5471, 2017.
W. Eljaoued, N. Ben Yahia, and N. B. Ben Saoud, “A Qualitative-Quantitative Resilience Assessment Approach for Socio-Technical Systems,” Procedia Computer Science, vol. 176, pp. 2625–2634, 2020, doi: 10.1016/j.procs.2020.09.305.
P. Zhu, J. P. Liyanage, S. S. Panesar, and R. Kumar, “Review of Workflows of Emergency Shutdown Systems in the Norwegian Oil and Gas Industry,” Safety Science, vol. 121, no. February 2019, pp. 594–602, 2020, doi: 10.1016/j.ssci.2019.02.037.
P. Baybutt, “A Critique of the Hazard and Operability (HAZOP) Study,” Journal of Loss Prevention in the Process Industries, vol. 33, pp. 52–58, 2015, doi: 10.1016/j.jlp.2014.11.010.
X. Zhou and T. Peng, “Application of Multi-Sensor Fuzzy Information Fusion Algorithm in Industrial Safety Monitoring System,” Safety Science, vol. 122, no. September 2019, p. 104531, 2020, doi: 10.1016/j.ssci.2019.104531.
S. Lu and S. Wang, “Intelligent Monitoring of Taijiquan Exercise Based on Fuzzy Control Theory,” Microprocessors and Microsystems, vol. 82, no. December 2020, p. 103859, 2021, doi: 10.1016/j.micpro.2021.103859.
W. Li, L. Zhang, and W. Liang, “An Accident Causation Analysis and Taxonomy (ACAT) Model of Complex Industrial System from Both System Safety and Control Theory Perspectives,” Safety Science, vol. 92, pp. 94–103, 2017, doi: 10.1016/j.ssci.2016.10.001.
C. D. Nwankwo, S. C. Theophilus, and A. O. Arewa, “A Comparative Analysis of Process Safety Management (PSM) Systems in the Process Industry,” Journal of Loss Prevention in the Process Industries, vol. 66, no. November 2019, p. 104171, 2020, doi: 10.1016/j.jlp.2020.104171.
A. Pakonen and K. Bj, “Safety and Reliability. Theory and Applications,” Safety and Reliability Theory and Applications, 2017, doi: 10.1201/9781315210469.
A. Pakonen, I. Buzhinsky, and K. Björkman, “Model Checking Reveals Design Issues Leading to Spurious Actuation of Nuclear Instrumentation and Control Systems,” Reliability Engineering and System Safety, vol. 205, no. August 2020, p. 107237, 2021, doi: 10.1016/j.ress.2020.107237.
D. Berdik, S. Otoum, N. Schmidt, D. Porter, and Y. Jararweh, “A Survey on Blockchain for Information Systems Management and Security,” Information Processing and Management, vol. 58, no. 1, p. 102397, 2021, doi: 10.1016/j.ipm.2020.102397.
