AN OVERVIEW OF LAN/WLAN IN CAD/CAM/CAE APPLICATIONS

Authors

  • Aditya Reza Haswendra Universitas Sriwijaya

DOI:

https://doi.org/10.36706/jmse.v7i1.35

Keywords:

LAN, WLAN, CAD, CAM, CAE, Ethernet, Security, Network

Abstract

Computer network is an interface of two or more computers that is built for the purpose of sharing, information, data, and resources. Computer network has nodes that serve as the origin, route, and receiver of data. Computer network is built using a combination of hardware and software. LANs and WLANs are the most common form of computer network and they are used intensively and extensively in CAD/CAM/CAE applications. This review talks about the latest implementation of LANs/WLANs in CAD/CAM/CAE applications, their limitations, and consideration for their usage. There are four aspects that a LAN/WLAN system must fulfill which are Fast, Expandable, Reliable, and Secure. LAN and WLAN including their many standards each has different properties which influence their implementation in CAD/CAM/CAE applications.

Downloads

Download data is not yet available.

References

S. A. S. Obayes, I. R. K. Al-Saedi, and F. M. Mohammed, “Prototype Wireless Controller System Based on Raspberry Pi and Arduino for Engraving Machine,” Proc. - 2017 UKSim-AMSS 19th Int. Conf. Model. Simulation, UKSim 2017, pp. 69–74, 2018, doi: 10.1109/UKSim.2017.20.

B. Metcalfe, “Metcalfe’s Law after 40 Years of Ethernet,” Computer (Long. Beach. Calif)., vol. 46, no. 12, pp. 26–31, 2013, doi: 10.1109/MC.2013.374.

A. Catarina and P. Pinto, “Advanced Mobile Manipulation for Logistics in Hospitals or Laboratories,” 2016.

Q. P. Ha, L. Yen, and C. Balaguer, “Robotic Autonomous Systems for Earthmoving in Military Applications,” Autom. Constr., vol. 107, no. August, 2019, doi: 10.1016/j.autcon.2019.102934.

I. S. A. Abdullah, A. Babiker, and A. N. Mustafa, “The Impact of Distance on WLAN and LAN Network Performance,” Int. J. Sci. Res., vol. 5, no. 2, pp. 1063–1065, 2016, doi: 10.21275/v5i2.nov161252.

A. Naz, A. U. Qureshi, and S. Rai, “IMPROVING LAN PERFORMANCE & SPEED BY FAST ETHERNET TECHNOLOGY,” 2017.

H. B. Kief and H. A. Roschiwal, “CNC Handbook,” McGraw-Hill Education, 2012, p. 390.

A. F. H. Leon, O. J. S. Parra, and M. J. E. Rico, “Congestion Control in Lan-to-Lan Connections,” Internet Distrib. Comput. Syst., no. 10th International Conference, pp. 142–151, 2017.

B. Kim, J. Kim, and S. H. Noh, “Managing Array of SSDs When the Storage Device Is No Longer the Performance Bottleneck,” 9th USENIX Work. Hot Top. Storage File Syst. HotStorage 2017, co-located with USENIX ATC 2017, 2017.

A. M. Khalaf, M. S. A. El Salam, and K. A. Ahmed, “Investigation of Different Ethernet Wiring and Different Frame Size to Enhance the Performance of LAN,” Int. Conf. Adv. Commun. Technol. ICACT, vol. 5, no. 2, pp. 787–796, 2017, doi: 10.23919/ICACT.2017.7890228.

X. Lv, F. He, Y. Cheng, and Y. Wu, “A Novel CRDT-Based Synchronization Method for Real-Time Collaborative CAD Systems,” Adv. Eng. Informatics, vol. 38, no. July, pp. 381–391, 2018, doi: 10.1016/j.aei.2018.08.008.

Y. Wu, F. He, and S. Han, “Collaborative CAD Synchronization Based on a Symmetric and Consistent Modeling Procedure,” Symmetry (Basel)., vol. 9, no. 4, pp. 1–20, 2017, doi: 10.3390/sym9040059.

M. Mu, H. Stokking, and F. den Hartog, Network Delay and Bandwidth Estimation for Cross-Device Synchronized Media. 2018.

R. M. A. M. K. Eshghi, “Inside Solid State Drives,” vol. 37, pp. 203–231, 2013, doi: 10.1007/978-94-007-5146-0.

C. W. Lin and H. Yu, “Invited - Cooperation or Competition?: Coexistence of Safety and Security in next-Generation Ethernet-Based Automotive Networks,” Proc. - Des. Autom. Conf., vol. 05-09-June, 2016, doi: 10.1145/2897937.2905006.

B. B. Kraemer and I. S. Association, “Commentary Automotive Ethernet,” no. December, p. 2016, 2016.

C. Corbett, E. Schoch, F. Kargl, and P. Felix, “Automotive Ethernet: Security Opportunity or Challenge?,” Lect. Notes Informatics, pp. 45–54, 2016.

T. Kiravuo, M. Sarela, and J. Manner, “A Survey of Ethernet LAN Security,” IEEE Commun. Surv. Tutorials, vol. 15, no. 3, pp. 1477–1491, 2013, doi: 10.1109/SURV.2012.121112.00190.

A. M. Al Naamany, A. Al Shidhani, and H. Bourdoucen, “IEEE 802 . 11 Wireless LAN Security Overview,” Ijcsns, vol. 6, no. 5, pp. 138–156, 2006.

P. Feng, “Wireless LAN Security Issues and Solutions,” Proc. - 2012 IEEE Symp. Robot. Appl. ISRA 2012, pp. 921–924, 2012, doi: 10.1109/ISRA.2012.6219343.

Downloads

Published

2020-10-07

How to Cite

Haswendra , A. R. . (2020). AN OVERVIEW OF LAN/WLAN IN CAD/CAM/CAE APPLICATIONS. Journal of Mechanical Science and Engineering, 7(1), 007–011. https://doi.org/10.36706/jmse.v7i1.35