An Overview of process CNC Machining
DOI:
https://doi.org/10.36706/jmse.v6i2.32Keywords:
CNC, Machining, CAM, CADAbstract
This paper discusses the pre and process of running a computer numerical control machine (CNC) using computer-aided design (CAD) software commonly used to design products to be produced and computer-aided manufacture (CAM) software used to control machines during the manufacturing process. Some types of CNC machines in general, namely CNC lathe machine and CNC milling machine. The history of the development of the CNC Machine was begun in 1952 by John Pearseon of the Massachusetts Institute of Technology on behalf of the United States Air Force, which aims to make complicated special workpieces. In addition, this paper also discusses the basic numerical code types used in CNC machines.
Downloads
References
E. Prianto and H. S. Pramono, “PROSES PERMESINAN CNC DALAM PEMBELAJARAN SIMULASI,” pp. 62–68.
Y. Setyoadi, K. Latifah, J. T. Mesin, and J. Informatika, “Integrasi Software CADCAM Dalam Sistem Operasi Mesin Bubut CNC,” pp. 149–159.
Y. Lu, N. Kaushal, N. Denier, and J. S. H. Wang, “Health of Newly Arrived Immigrants in Canada and the United States: Differential Selection on Health,” Heal. Place, vol. 48, no. August, pp. 1–10, 2017, doi: 10.1016/j.healthplace.2017.08.011.
M. Peruzzini, F. Grandi, and M. Pellicciari, “Benchmarking of Tools for User Experience Analysis in Industry 4.0,”
Procedia Manuf., vol. 11, no. June, pp. 806–813, 2017, doi: 10.1016/j.promfg.2017.07.182.
C. Leyh, S. Martin, and T. Schaffer, “Industry 4.0 and Lean Production-A Matching Relationship? An Analysis of Selected Industry 4.0 Models,” Proc. 2017 Fed. Conf. Comput. Sci. Inf. Syst. FedCSIS 2017, vol. 11, pp. 989–993, 2017, doi: 10.15439/2017F365.
F. Baena, A. Guarin, J. Mora, J. Sauza, and S. Retat, “Learning Factory: The Path to Industry 4.0,” Procedia Manuf., vol. 9, pp. 73–80, 2017, doi: 10.1016/j.promfg.2017.04.022.
“Solidworks.” [Online]. Available: https://www.solidworks.com/. [Accessed: 07-Apr-2020].
“CNC Softwere for Machine Tools.” [Online]. Available: https://camworks.com/. [9] J. Taiavage and D. Phillips, “Simulating Manufacturing Systems,” no. May, pp. 53– 55, 1983.
“Pengetahuan Dasar Mesin Bubut Cnc.” [Online]. Available: http://achmadarifin.com/pengetahuan-dasarmesin-bubut-cnc. [Accessed: 07-Apr-2020].
“Mesin Bubut CNC,” 2020. [Online]. Available: https://www.bukusekolah.net/. [Accessed: 18-Mar-2020].
D. G. Subagio and T. D. Atmaja, “The Use of Open Source Software for Open Architecture System on CNC Milling Machine,” J. Mechatronics, Electr. Power, Veh. Technol., vol. 2, no. 2, p. 105, 2012, doi: 10.14203/j.mev.2011.v2.105-112.
“Mesin Frais CNC.” [Online]. Available: https://www.bukusekolah.net/2019/02/mesi n-frais-cnc.html. [Accessed: 18-Mar-2020].
G. Poon, P. J. Gray, S. Bedi, and D. Miller, “Architecture for Direct Model-to-Part CNC Manufacturing,” vol. 4, no. 1, pp. 14–18.
Widarto, TEKNIK PEMESINAN JILID 2 SMK Direktorat Pembinaan Sekolah Menengah Kejuruan. 2010.
S. Yoewono, W. Rojuli, and J. Ganesa, “PEMBUATAN PERANGKAT LUNAK CAM UNTUK MESIN CNC FREIS 3 SUMBU PADA AutoCAD,” vol. XIX, no. 1, 2000.
H. Seputro, D. T. Elektro, and F. T. Industri, “Mesin Cnc,” pp. 1–7.
